Part Number Hot Search : 
30102 2N540 2N540 DEVICE S1500 024ZS3F C7SZ0 KDS12
Product Description
Full Text Search
 

To Download TA78DS05F06 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 TA78DS05,06,08,09,10,12,15F,05AF
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA78DS05F, TA78DS06F, TA78DS08F, TA78DS09F, TA78DS10F, TA78DS12F, TA78DS15F, TA78DS05AF
5 V, 6 V, 8 V, 9 V, 10 V, 12 V, 15 V Low Dropout Voltage Regulator
The TA78DSxxF series consists of fixed-positive-output voltage regulator ICs capable of sourcing current up to 30 mA. Due to the features of low dropout voltage and low standby current, these devices are useful for battery-powered equipment. This series includes built-in current limiting, thermal shutdown, over voltage protection, input fault protection and excessive transient protection circuits.
Features
Low standby current of 600 A typical. Maximum output current of 30 mA. Low dropout voltage of less than 0.3 V. Multi-protection: Reverse connection of power supply, 60V load dump, thermal shut down and current limiting. Packaged in PW-Mini (SOT-89). Weight: 0.05 g (Typ.)
Pin Assignment
Marking side
1 OUT 2 GND (CASE) 3 IN
Marking
Part No. (or abbreviation code) *1 Part No. (or abbreviation code) AQ Part No. TA78DS05AF TA78DS05F TA78DS06F TA78DS08F TA78DS09F TA78DS10F TA78DS12F TA78DS15F
A
Lot No.
Q
A line indicates lead (Pb)-free package or lead (Pb)-free finish. *1
AP BP CP DP EP FP GP
1
2006-12-04
TA78DS05,06,08,09,10,12,15F,05AF
Block Diagram
Absolute Maximum Ratings (Ta = 25C)
Characteristics Operating input voltage Input voltage of surge Power dissipation Operating temperature Storage temperature Junction temperature Thermal resistance Soldering temperature time (Ta = 25C) Symbol VIN VIN PD Topr Tstg Tj Rth (j-a) Tsol Rating 29 60 500 -40~85 -55~150 150 250 260 (10 s) Unit V V mW C C C C/W C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
2
2006-12-04
TA78DS05,06,08,09,10,12,15F,05AF
TA78DS05F Electrical Characteristics
Characteristics
(Unless otherwise specified, VIN = 14 V, IOUT = 5 mA, CIN = 0.1 F, COUT = 3.3 F, Tj = 25C)
Symbol Test Circuit Test Condition 5.35 V VIN 26 V Output voltage VOUT 5.35 V VIN 26 V, -40C Ta 85C 9.0 V VIN 16 V 6.0 V VIN 26 V 5.0 mA IOUT 30 mA IOUT = 0 mA 6 V VIN 26 V, IOUT = 5 mA IOUT = 5 mA IOUT = 10 mA Min 4.75 4.5 29 Typ. 5.0 5.0 1 4 1 0.6 0.7 0.1 0.2 33 Max 5.25 5.5 10 30 50 1 1 0.2 0.3 V Unit
Line regulation Load regulation Quiescent current
Reg*line Reg*load IB

mV mV mA
Dropout voltage Max operating voltage
VD VIN

V V
TA78DS05AF Electrical Characteristics
Characteristics
(Unless otherwise specified, VIN = 14 V, IOUT = 5 mA, CIN = 0.1 F, COUT = 3.3 F, Tj = 25C)
Symbol Test Circuit Test Condition 5.35 V VIN 26 V Output voltage VOUT 5.35 V VIN 26 V, -40C Ta 85C 9.0 V VIN 16 V 6.0 V VIN 26 V 5.0 mA IOUT 30 mA IOUT = 0 mA 6 V VIN 26 V, IOUT = 5 mA IOUT = 5 mA IOUT = 10 mA Min 4.8 4.75 29 Typ. 5.0 5.0 1 4 1 0.6 0.7 0.1 0.2 33 Max 5.2 5.25 10 30 50 1 1 0.2 0.3 V Unit
Line regulation Load regulation Quiescent current
Reg*line Reg*load IB

mV mV mA
Dropout voltage Max operating voltage
VD VIN

V V
3
2006-12-04
TA78DS05,06,08,09,10,12,15F,05AF
TA78DS06F Electrical Characteristics
Characteristics
(Unless otherwise specified, VIN = 14 V, IOUT = 5 mA, CIN = 0.1 F, COUT = 3.3 F, Tj = 25C)
Symbol Test Circuit Test Condition 6.35 V VIN 26 V Output voltage VOUT 6.35 V VIN 26 V, -40C Ta 85C 10 V VIN 17 V 7.0 V VIN 26 V 5.0 mA IOUT 30 mA IOUT = 0 mA 7 V VIN 26 V, IOUT = 5 mA IOUT = 5 mA IOUT = 10 mA Min 5.7 5.4 29 Typ. 6.0 6.0 1 4 1 0.6 0.7 0.1 0.2 33 Max 6.3 6.6 20 40 60 1.1 1.1 0.2 0.3 V Unit
Line regulation Load regulation Quiescent current
Reg*line Reg*load IB

mV mV mA
Dropout voltage Max operating voltage
VD VIN

V V
TA78DS08F Electrical Characteristics
Characteristics
(Unless otherwise specified, VIN = 14 V, IOUT = 5 mA, CIN = 0.1 F, COUT = 3.3 F, Tj = 25C)
Symbol Test Circuit Test Condition 8.35 V VIN 26 V Output voltage VOUT 8.35 V VIN 26 V, -40C Ta 85C 12 V VIN 19 V 9.0 V VIN 26 V 5.0 mA IOUT 30 mA IOUT = 0 mA 9 V VIN 26 V, IOUT = 5 mA IOUT = 5 mA IOUT = 10 mA Min 7.6 7.2 29 Typ. 8.0 8.0 2 5 4 0.7 0.8 0.1 0.2 33 Max 8.4 8.8 30 60 80 1.2 1.2 0.2 0.3 V Unit
Line regulation Load regulation Quiescent current
Reg*line Reg*load IB

mV mV mA
Dropout voltage Max operating voltage
VD VIN

V V
4
2006-12-04
TA78DS05,06,08,09,10,12,15F,05AF
TA78DS09F Electrical Characteristics
Characteristics
(Unless otherwise specified, VIN = 14 V, IOUT = 5 mA, CIN = 0.1 F, COUT = 3.3 F, Tj = 25C)
Symbol Test Circuit Test Condition 9.35 V VIN 26 V Output voltage VOUT 9.35 V VIN 26 V, -40C Ta 85C 13 V VIN 20 V 10 V VIN 26 V 5.0 mA IOUT 30 mA IOUT = 0 mA Quiescent current IB 10 V VIN 26 V, IOUT = 5 mA IOUT = 5 mA IOUT = 10 mA Min 8.55 8.1 29 Typ. 9.0 9.0 2 5 4 0.7 0.8 0.1 0.2 33 Max 9.45 9.9 35 70 90 1.3 1.3 0.2 0.3 mA V Unit
Line regulation Load regulation
Reg*line Reg*load

mV mV
Dropout voltage Max operating voltage
VD VIN

V V
TA78DS10F Electrical Characteristics
Characteristics
(Unless otherwise specified, VIN = 14 V, IOUT = 5 mA, CIN = 0.1 F, COUT = 3.3 F, Tj = 25C)
Symbol Test Circuit Test Condition 10.35 V VIN 26 V Output voltage VOUT 10.35 V VIN 26 V, -40C Ta 85C 14 V VIN 21 V 11 V VIN 26 V 5.0 mA IOUT 30 mA IOUT = 0 mA Quiescent current IB 11 V VIN 26 V, IOUT = 5 mA IOUT = 5 mA IOUT = 10 mA Min 9.5 9.0 29 Typ. 10.0 10.0 3 7 6 0.7 0.8 0.1 0.2 33 Max 10.5 11.0 40 80 100 1.4 1.4 0.2 0.3 mA V Unit
Line regulation Load regulation
Reg*line Reg*load

mV mV
Dropout voltage Max operating voltage
VD VIN

V V
5
2006-12-04
TA78DS05,06,08,09,10,12,15F,05AF
TA78DS12F Electrical Characteristics
Characteristics
(Unless otherwise specified, VIN = 18 V, IOUT = 5 mA, CIN = 0.1 F, COUT = 3.3 F, Tj = 25C)
Symbol Test Circuit Test Condition 12.35 V VIN 26 V Output voltage VOUT 12.35 V VIN 26 V, -40C Ta 85C 16 V VIN 23 V 13 V VIN 26 V 5.0 mA IOUT 30 mA IOUT = 0 mA Quiescent current IB 13 V VIN 26 V, IOUT = 5 mA IOUT = 5 mA IOUT = 10 mA Min 11.4 10.8 29 Typ. 12.0 12.0 4 8 2 0.8 1.0 0.1 0.2 33 Max 12.6 13.2 50 100 120 1.5 1.5 0.2 0.3 mA V Unit
Line regulation Load regulation
Reg*line Reg*load

mV mV
Dropout voltage Max operating voltage
VD VIN

V V
TA78DS15F Electrical Characteristics
Characteristics
(Unless otherwise specified, VIN = 20 V, IOUT = 5 mA, CIN = 0.1 F, COUT = 3.3 F, Tj = 25C)
Symbol Test Circuit Test Condition 15.35 V VIN 26 V Output voltage VOUT 15.35 V VIN 26 V, -40C Ta 85C 19 V VIN 26 V 16 V VIN 26 V 5.0 mA IOUT 30 mA IOUT = 0 mA Quiescent current IB 16 V VIN 26 V, IOUT = 5 mA IOUT = 5 mA IOUT = 10 mA Min 14.25 13.5 29 Typ. 15.0 15.0 5 8 1 1.0 1.2 0.1 0.2 33 Max 15.75 16.5 60 130 150 1.6 1.6 0.2 0.3 mA V Unit
Line regulation Load regulation
Reg*line Reg*load

mV mV
Dropout voltage Max operating voltage
VD VIN

V V
6
2006-12-04
TA78DS05,06,08,09,10,12,15F,05AF
(mA)
7
2006-12-04
TA78DS05,06,08,09,10,12,15F,05AF
8
2006-12-04
TA78DS05,06,08,09,10,12,15F,05AF
Application Circuit
The capacitors CIN/COUT must be guaranteed to operate within the temperature range in which the regulator operates correctly. The equivalent series resistance (ESR) of COUT must be less than 1 inside the operating temperature range.
9
2006-12-04
TA78DS05,06,08,09,10,12,15F,05AF
Package Dimensions
10
2006-12-04
TA78DS05,06,08,09,10,12,15F,05AF
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
11
2006-12-04


▲Up To Search▲   

 
Price & Availability of TA78DS05F06

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X